E8X / E9X PRO Drift Angle Kit

We have tried every single setting to guarantee the best possible steering control and feedback for E8X/E9X chassis. Years of experience racing these chassis.

Buttery smooth & easy control. No steering wobbles, binds or shakes - all combined with huge steering angle.

With this kit, you no longer need to use or modify your original knuckle - assembly is much easier.

Fits all E81/E82/E87/E88 1 series, E90/E91/E92/E93 3 series BMW's - NON M BRAKES

Some of Suboske Racing E8X/E9X Drift angle kit features :

• Up to 72 degrees of steering angle

• High strength steel control arms, knuckles and tie rod ends

• Wider stance to achieve necessary clearance

• Roll center correction

• Bump steer correction

• Optimal Ackermann for drifting (4 settings)

• Adjustable steering stoppers

• Excellent steering control/feedback

• Quality bearings are used to ensure long lifetime

• Easily adjustable caster

This kit has everything you need to install :

• 2x Lower control arms

• 2x Knuckles

• 2x Outer tie rods

• 2x Top mounts

• 4x Ackermann shims

• All bearings and hardware necessary for installation

• Installation/setup instruction

Coilovers are suggested to run with this kit. Please let us know what coilover brand you plan to use - we can help you to spec out appropriate top mounts!

To install this kit you will need :

• Stock inner tie rods

• Stock brakes (non-M)

• Stock wheel bearings

• Stock front sway bar will have to be removed

• Minimum wheel size R17

• Chassis seam behind the wheel (inner wheel well) is suggested to be flattened for clearance (no cutting required)

• Wider front fenders or overfenders. +65mm for E8X, +50mm for E9X (these values are for 235/40R18 ET20 9J, please use fitment calculator for different wheel/tire combos)

• Coilovers *suggested

• Qualified mechanic

RACE USE ONLY