E46 Drift Angle Kit

Got tired of fasteners loosening or breaking because of single shear/adapter type E46 lock kits? Tired of wheels wobbling and/or binding under huge steering angle? We got tired of it too! That is why we made a kit that does not have these common issues. We guarantee that with this kit, your car control will be as smooth as butter under any conditions: dry, wet, snow or ice! We have tested our products under all conditions!

Some of Suboske Racing E46 Drift angle kit features :

• Up to 72 degrees of steering angle

• High strength steel control arms and knuckles

• Wider stance to achieve necessary clearance

• Roll center correction

• Bump steer correction

• Optimal Ackermann for drifting (4 positions)

• Adjustable steering stoppers

• Excellent steering steering control/feedback

• Quality bearings are used to ensure long lifetime

This kit has everything you need to install :

• 2x Lower control arms

• 2x Knuckles

• 2x Outer tie rods

• 2x Top hats

• 2x Lower control arm bushing

• 4x Ackermann shims

• All bearings and hardware necessary for installation

• Installation/setup instruction

For simplicity we use E82/E92 generation bolt-on type wheel bearings (P.N. 31216765157). We can supply the kits with or without these bearings, please choose appropriately, stock wheel bearings do not fit.

Must use coilovers to run this kit. As with any other kit, depending on coilover brand/model, some modifications might be required to adapt top hats.

To install this kit you will need :

• Front coilovers

• Stock inner tie rods

• Stock brakes

• Front sway bar will have to be removed *if necessary, can be adapted

• Minimum wheel size R17

• Wider front fenders or overfenders are highly suggested (4cm wider per side fit perfect with R17 ET20 8J/8.5J wheels)

• Qualified mechanic

Racing use only