BMW E36 E36M Front Drift Angle Lock Kit V2 Wisefab

The Wisefab suspension kit raises the front roll center with lowered suspension, providing greater roll stiffness.

Modified steering geometry (trail and Ackermann)

The steering geometry can be adjusted from positive to parallel Ackermann in just a few minutes, even on the track, without affecting toe.

Good camber control at high steering angles

At high steering angles, the front wheel will have positive camber, which is not a desirable effect. This reduces front grip, and during a turn, it creates a transition from the inner edge to the outer edge. This cannot be completely eliminated, but with optimal geometry, it has been minimized.

During drifting, when the steering angle is significantly greater, vibrations may appear on the steering wheel, even with the same geometry, and this can become problematic. Wisefab has changed the geometry so that it does not cause any handling issues.

In the case of some suspension geometries, at large steering angles, it may happen that the steering wheel locks in the extreme position, and the driver will need to use a lot of force to turn it to the other side. This problem has been eliminated by the manufacturer. Features: Adjustable lock stop. Stronger inner ball joint compared to OEM and the older Wisefab version. Set includes: Adjustable upper coilover mounts, Formula Drift compatibility. Hub adapters with adjustable hardware. Lightweight lower control arms. Assembled tie rods. Adjustable rear lower control arm mount. Installation manual. This set assumes that the coilover suspension has sufficient clearance. We recommend tires with a diameter no larger than 645 mm (235/40 R18). For this set, wider fenders or fender flares are required.