{"product_id":"ewp115-nylon-remote-electric-water-pump-12v","title":"EWP115 Nylon - Remote Electric Water Pump (12V)","description":"\u003cp\u003eEWP®115 Nylon – Remote Electric Water Pump (12V)\u003cbr\u003ePart #8125\u003cbr\u003eThe EWP®115 Nylon 12V is available for purchase in following options:\u003c\/p\u003e\n\u003cp\u003ePump Only (Part #8125)\u003cbr\u003eKit (Part #8025)\u003cbr\u003eCombo with Controller (Part #8930)\u003cbr\u003eThe EWP®115 pump is suitable for small, medium, large, high-performance and 4WD vehicles. It’s a performance product that improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy.\u003c\/p\u003e\n\u003cp\u003eThe EWP®115 is a practical alternative to the mechanical belt-driven pump or fitted as an auxiliary pump. Mechanical belt-driven water pumps run directly off the motor and sap engine power … the EWP®115 is hardwired into your electrical system, by-passing the engine and releasing up to an additional 10kw (13hp).\u003c\/p\u003e\n\u003cp\u003eContents\u003cbr\u003ePart description    Units\u003cbr\u003eEWP®115 (Nylon) 12V    1\u003cbr\u003eTechnical specifications\u003cbr\u003eVoltage    12 Volt Pump\u003cbr\u003eOperating voltage    3V DC to 15V DC\u003cbr\u003eMaximum current    10A @ 13V\u003cbr\u003eFlow rate (max)    139 L\/min (36.7 US gal\/min) @ 13V DC\u003cbr\u003eOperating temp.    -40° to 120°C\u003cbr\u003e(-40° to 248°F)\u003cbr\u003ePump design    Clockwise centrifugal with volute chamber\u003cbr\u003ePump weight    920 grams (2.03 lb)\u003cbr\u003ePump material    Nylon 66 - 30% Galss Filled\u003cbr\u003eBurst pressure    500 kPa (72.5 psi)\u003cbr\u003eSeal    Ceramic face seal\u003cbr\u003eSelf priming    No, none of our pumps are self-priming\u003cbr\u003eFits hose sizes    35mm to 51mm (1⅜” to 2”)\u003cbr\u003ePush on fittings\u003cbr\u003ePush-on fitting size    EWP inlet \u0026amp; outlet 38mm \u003cbr\u003ewith 3mm Sleeve (#8510) 44mm\u003cbr\u003ewith 6mm Sleeve (#8511) 51mm\u003cbr\u003eEWP \u0026amp; controller installation demonstration\u003c\/p\u003e\n\u003cp\u003eCombined with an LCD EWP®\/Fan Digital Controller (Sold separately Part #8002 or EWP® Combo Pack) will manage both the EWP® and Thermatic® fan operation. The Digital Controller will vary the speed of the EWP® in response to the engine’s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency. The Thermatic® Fan\/s will be activated automatically once the engine coolant rises 3°C (5.4°F) above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 10°C \/ 14°F below the set temperature) after engine shut down, eliminating ‘heat soak’ and extending engine life. The EWP® Controller Combo Pack is supplied in a do-it-yourself kit with everything you need for fitment to your vehicle’s engine, including an easy-to-follow DIY instruction booklet.\u003c\/p\u003e\n\u003cp\u003eKey benefits\u003cbr\u003eThe world’s most advanced total engine cooling management system:\u003c\/p\u003e\n\u003cp\u003eblue-check-tick.png  universal fit\u003cbr\u003eblue-check-tick.png  more power\u003cbr\u003eblue-check-tick.png  more cooling\u003cbr\u003eblue-check-tick.png  increase fuel efficiency\u003cbr\u003eblue-check-tick.png  extend engine life\u003cbr\u003eblue-check-tick.png  world-leading technology\u003cbr\u003eEWP® installation options\u003cbr\u003eInstalling an EWP® as an AUXILIARY PUMP\u003cbr\u003eLeaving the mechanical water pump in place, install the EWP® into the bottom radiator hose.\u003cbr\u003eRemove the thermostat and drill two approx. 3mm (1\/8\") holes in the thermostat plate to allow some coolant circulation when the thermostat is closed. Re-install ensuring that the thermostat housing is clean and a new gasket is used if required.\u003cbr\u003eEWP® installation – disabling mechanical water pump\u003cbr\u003eDisengaged mechanical water pump (recommended)\u003cbr\u003eRemoved mechanical water pump (ideal)\u003cbr\u003eIn most cases EWP® will be adequately supported by the radiator hose. Where mounting is required, the EWP® must be soft mounted to protect against vibration. For the EWP®115, EWP®140 and EWP®150 Part #8700 or #8710 Mounting bracket is recommended.\u003c\/p\u003e","brand":"Davies Craig","offers":[{"title":"Default Title","offer_id":53436035957078,"sku":"DC8125","price":159.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/6119\/2790\/files\/8025-DaviesCraig-01_75b02fe0-2e67-43d4-8f5c-1e7733ef2f18.webp?v=1777963640","url":"https:\/\/driftmafia.life\/products\/ewp115-nylon-remote-electric-water-pump-12v","provider":"DriftMafia","version":"1.0","type":"link"}